The Chevrolet Corvette C8 broke with decades of front-engine tradition, and it also became the first Corvette offered only with a dual-clutch automatic. According to The Drive's account of a recent test drive, cost explains the decision: developing two new transaxles, one manual and one automatic, for a mid-engine car was more than General Motors' budget could absorb, and executives chose the version that would win comparison tests against more expensive machinery.
Tremec, which supplies the six-speed manual used in GM performance cars including the Cadillac Blackwing models and the discontinued Camaro, has built a running manual C8 development car that is not merely a rumor. The Drive's reviewer drove it.
A one-off track car
Tremec invited the reviewer and several potential customers to sample its transmissions at Motorsports Gateway, a new private track outside Howell, Michigan, recent enough that it does not yet appear on Google. There the reviewer was handed the keys to the Peitz Performance C8 race car fitted with Tremec's new manual transaxle, a one-off build, with the instruction to avoid hitting anything.
The car is a pure track build. Interior fit and finish is essentially absent, the shifter protrudes from the spot where the storage cubby and automatic selector normally sit, and the cabin is fully caged with a full harness. Seat adjustment is virtually nonexistent, set for a driver with longer legs than the reviewer's 5-foot-7 frame, so reaching the pedals and bracing in corners was difficult and heel-toe work was awkward. On a green track on a November afternoon in Michigan, the pace was therefore modest.
What changed to fit the manual
Peitz did not have to make significant alterations to the car itself. The tunnel was cut to install the clutch pedal hardware, but the manual gearbox otherwise sits exactly where the stock dual-clutch unit would, with no special mating hardware required. The C8's pedal box also has ample room for a clutch, and even with a third pedal it feels roomier than a last-generation Camaro's.
The shifter trade-off
Because the shifter is remotely mounted, with a cable running rearward to the transaxle, working the gearbox feels different from a front-engine car using the TR-6060 six-speed, where the selector connects mechanically to the transmission. The transaxle is a bit less precise and less snick-snicky, and less notchy, which smooths off some of the Tremec unit's rougher edges. Some drivers may prefer that; others may miss the more mechanical feel. The only fixes would be moving the engine forward, which yields a C7, or moving the shifter rearward into the space the engine now occupies.
The price problem
That trade-off is small compared with the cost. The gearbox alone runs about $75,000, so a completed manual C8 build carries a price tag that rivals a showroom-spec Z06. Tremec says the price will come down as volume increases. OEMs are interested, the company told The Drive, and not necessarily or exclusively General Motors: the gearbox was engineered to fit the C8, but other automakers are said to want a high-torque manual transaxle. No names were given.
The demonstration shows the engineering is not the obstacle: a manual C8 fits the existing mid-engine package with modest fabrication. The obstacle is commercial, since the conversion only makes sense once the transmission can be built in volumes that bring its cost down.
