I handle roofing material orders for B2B buyers — shingles, clay tile, sheet metal, PVC and ASA tile — and I have been doing it for nine years. In that time I have personally made, and written down, eleven mistakes big enough to cost real money: roughly $14,000 in scrap, re-shipped pallets, and one air freight invoice I still do not enjoy explaining. (Note to self: stop calling these learning experiences in front of my boss.)
What follows is the FAQ I wish someone had handed me in 2017. Not a buyer's guide — a list of the questions that actually decide whether your order lands on site or lands in a dumpster.
- Clay tile, asphalt shingles, or PVC/ASA tile — where do I start?
- How do I tell a real factory from a reseller?
- Can I place a small trial order, or will I get ignored?
- Why is one metal roof quote 40% cheaper than another?
- 3-tab versus architectural shingles — does it matter?
- How do I verify claims like impact resistant or waterproof?
- What breaks a shipment that nobody warns you about?
- What goes in a first RFQ?
Clay tile, asphalt shingles, or PVC/ASA tile — where do I start?
Start with the roof structure and the maintenance budget, not the material. In my experience the material is usually decided for you by two numbers: dead load and repair access. A clay tile roof can carry roughly three to five times the dead load of a 3-tab asphalt roof, so on light-gauge steel or an older timber frame, clay is often off the table before price even comes up. Asphalt shingles win on first cost and are the easiest thing on the list to repair. PVC and ASA tile are lightweight, which is why they show up on industrial and export projects — but ask which one you are actually getting, because ASA is a capped layer with better color retention and PVC usually is not.
The trigger event was 2019: a client asked for clay tile on a light steel frame. My quote looked great. The engineer's answer required extra purlins and quietly ate the entire savings.
How do I tell a real factory from a trading company when the search says best roof tile manufacturer in China?
That phrase is a search query, not a fact. Anyone can rank for it. Three things separate a real factory from a reseller: a live video walkthrough with a timestamp visible on a wall clock (recorded tours get recycled for years), the number of presses or kilns and their daily capacity, and who owns the mold. If you are asking for OEM ceramic roof tile or a custom profile, that last one decides everything — if the factory owns the tooling, you cannot move the order later without paying for it twice.
In 2021 I approved a custom tile profile with $2,600 in tooling. The color code on the signed sheet and the color code that reached production were one digit apart. Four hundred pieces came back in the wrong shade. Nobody was lying. Nobody had a double-check step either. That is the pattern I keep running into — not dishonesty, just no process.
Can I place a small trial order, or will the factory ignore me?
Yes, you can ask, and you should ask directly instead of hinting at volume you do not have yet. Say the real number. A supplier who needs a 5,000-piece minimum and tells you so is useful information. A supplier who says no problem at all and then quietly bills you at container rates is not.
Personally, I have never regretted paying a worse per-unit price on a 200-piece trial. The vendors who treated my small orders seriously back in 2017 are, several of them, the ones I still place serious orders with now. Small does not mean unimportant — it means unproven, and unproven cuts both ways.
One caveat: do not expect container pricing on a pallet. Expect to pay for setup, packaging, and freight, and expect the per-piece number to be noticeably worse. That is fair. Being ignored after you have paid is not.
Why is one metal roof quote 40% cheaper than another?
Almost always a specification gap, not a scam. Four line items explain most of it: steel gauge (0.40 mm against 0.50 mm is a real price gap and a real hail gap), coating mass in g/m² on galvanized or Galvalume substrate, the paint system (polyester versus SMP versus PVDF), and whether you were quoted stone coated metal roofing or bare sheet roofing. Add freight and a 40% spread between two quotes that both say metal roofing price is entirely normal.
Then check the unit. In 2022 I caught a quote priced per square meter sitting next to my per-square budget — a 10.76× gap hiding in plain sight. Nobody was cheating. I had just never asked.
If you want comparable numbers, write one spec sheet and send the same sheet to everyone. Three identical specs beat ten friendly phone calls.
3-tab versus architectural shingles — does it actually matter?
3-tab shingles are single-layer, flat, lighter, and cheaper. Architectural shingles — also sold as dimensional or laminated — are two or more layers bonded together, thicker, and usually carry better wind and impact ratings. Premium asphalt shingles sit at the top of that ladder.
For a shed, the difference does not matter. For anything visible from the street or likely to be resold, the appearance-per-dollar is the best value in the whole roof, if you ask me. But wind resistance is where the money really is: ask for the wind rating and the standard behind it (ASTM D7158 or D3161), not the word premium.
My mistake, in 2018: I compared a 3-tab price against an architectural price and told the client the market had risen 30%. It had not. I had compared two different products and called it inflation. (Note to self: always compare the same spec sheet.)
How do I verify claims like impact resistant or waterproof?
Ask for the report, then ask three questions about it: which standard, which lab, what class. Impact resistance for shingles is normally quoted as UL 2218 Class 1 through 4; wind resistance as ASTM D7158 or D3161 class. Clay tile specifications reference ASTM C1167 in the US and EN 1304 in Europe. If a supplier cannot name a standard, they are quoting a brochure, not a test.
Second, unpack the word waterproof. A roof tile is the rain screen; the underlayment below it is what actually keeps water out. So ask about the system — tile, underlayment, flashing, and the details at hips and valleys — not just the tile. Anyone who says the tile alone makes waterproofing unnecessary is handing you a future repair bill.
Third, if the order is big enough, pay for third-party inspection yourself. A few hundred dollars is cheaper than a container that fails the spec you thought you agreed to. I learned that one at $3,200 plus a two-week delay.
What breaks a shipment that nobody warns you about?
The things that sink a container are rarely in the price list. Four of them:
Hip and ridge pieces. Everyone counts field tile and forgets hips, ridges, starters, and edge trim. On a hip roof those cut pieces are 8-12% of the roof and 100% of the schedule. I missed them in 2022 on a mixed order and paid air freight to recover three weeks.
Color lots. Ask whether the order is one batch. Two batches of the same color code can look visibly different on a wall, and no amount of blending fixes a hip line.
Breakage allowance. Tile breaks in transit. Ask what percentage gets packed as spares and what the claim process is, in writing, before the container leaves.
Pallet format. If the site has no forklift, pallet height and weight decide whether the delivery gets unloaded or gets refused.
None of that is dramatic. All of it costs more than the price difference you negotiated for a month.
What should go in my first RFQ?
Eight lines: material and profile; dimensions with tolerances; color with a physical reference or sample number; quantity per SKU; the standard you expect the product to meet; packaging and pallet format; port of discharge; target delivery window.
Then add the line that saves the most money: please confirm which of these points you cannot meet. Suppliers answer that honestly more often than you would expect, and a fast no is worth more than a slow maybe.
Prices move with steel, resin, and freight, so treat any number you receive as dated — verify current quotes before you budget (the figures in my own files are from early 2025, and several have moved since).
That is the whole checklist. It is not clever. It is just the list I wish I had before I spent $14,000 learning it.