Hardware & Tools

Makera Announces A1S Benchtop CNC With Optional Automatic Tool Changer

Maren OstergaardNovember 18, 20265 min read0 views

At a glance

  • Makera's new benchtop CNC targets aluminum, brass and copper, with an optional ATC and MQL system for desktop metalworking.
  • Makera has announced the A1S, a benchtop CNC positioned as an upgraded Carvera Air and offered in standard and ATC versions. Preorders start at $2,599, with shipping planned for early 2027 and options including MQL, a laser module and a fourth axis.
A compact benchtop CNC machine with an enclosed cutting area, a clamped metal billet and a separate coolant unit in a clean workshop.

Makera has introduced the A1S, its fourth benchtop CNC milling machine and an upgraded version of the Carvera Air. Based on the announced lineup, the model sits between the Carvera and the beginner-oriented Z1, which was announced last year. The A1S is aimed at users who want to cut metal parts from billet rather than build them with a 3D printer.

Makera says the machine is optimized for aluminum alloys 6061, 6063 and 7075, as well as brass and copper. Steel machining is also listed as possible when users follow the company's recommended depth of cut, feed parameters and tooling. The announcement frames this as a realistic boundary for a benchtop machine, rather than claiming that an aluminum-framed design can routinely cut steel and titanium.

Spindle and configuration

The standard A1S uses a 600 W Makera-developed spindle with closed-loop control from 0 to 24,000 rpm. It comes with an integrated 1/8-inch collet, with optional 1/4-inch, 6 mm, 4 mm and 3 mm collets. Makera lists spindle runout below 0.01 mm and motor resolution of 0.01 mm. A separate ATC version adds an automatic tool changer and uses a wireless 3D probe instead of the wired probe on the standard model.

Both versions share a 130 mm Z travel, but the ATC reduces Y travel. The standard A1S has a maximum work area of 300 x 200 x 130 mm, while the A1S ATC lists 300 x 150 x 130 mm. Makera says the ATC can be removed for larger workpieces and pass-through machining.

Options and accessories

Makera lists an optional 12-tool automatic tool changer, along with a bundle that pairs the A1S with a cyclone dust collector, fourth axis, laser module, PCB fabrication pack, MQL system, 3D wired probe and low-profile vise. The feature set also includes Smart Vision and Makera Studio software. For MQL, the company recommends California Air Tools 2010A 2-gallon compressor or 8010/8010A 8-gallon models, along with Coolube 2210AL for general metal machining.

The machine measures 50 cm wide, 45 cm deep and 45 cm high, with a maximum height of 84 cm when the lid is open. It weighs about 40 kg.

Pricing and availability

The A1S has a list price of $3,299 and a preorder price of $2,599. The A1S ATC lists at $4,299 and is available to preorder at $3,499. Makera says shipping will begin in January 2027, with estimated transit of 45 to 70 days and possible Chinese New Year delays. The MQL add-on can be bought with either machine at a discount or separately for $599, and accessories ordered with an A1S preorder carry a 15% discount.

Reported by Maren Ostergaard, Earthmoving Equipment Analyst.