Power Transmission

Igus Adds DeviceNet Cable to CFROBOT8.PLUS Robotic Cable Family

Mateo AlvarezOctober 28, 20265 min read4 views

At a glance

  • The new option targets continuous torsional motion with a smaller outer diameter and a tinned-copper braided shield.
  • Igus has added a DeviceNet cable to its CFROBOT8.PLUS robot cable family for dynamic applications with up to ±360° per meter of torsion. The company cites a reduced outer diameter, oil and UV resistance, and laboratory testing under simulated robotic motion.
A conceptual industrial robot arm bends a flexible cable bundle through a compact work area, with a cutaway highlighting a braided shield and slim cable jacket.

Igus has expanded its CFROBOT8.PLUS robot cable family with a DeviceNet cable intended for dynamic robotic applications. According to the company, the new cable can handle torsion of up to ±360° per meter, a requirement that arises when cables must follow continuous twisting motion rather than fixed bends.

The CFROBOT8.PLUS family is engineered for up to 10 million torsional cycles, Igus says. A specialized shield design is intended to preserve flexibility during continuous robotic movement. The new DeviceNet variant also has a reduced outer diameter, up to 21 percent smaller than previous CFROBOT8 models, which the company positions as an advantage in tight spaces.

Shield and environmental protection

A tinned-copper braided shield is used to help maintain signal integrity under demanding conditions. The cable also carries oil and UV resistance, allowing it to be used in both indoor and outdoor environments, according to Igus.

The company lists six-axis robots, handling systems, machine tools, linear and lead screw systems, and other equipment with continuous torsional movement among the target applications. These are settings where cable routing can be constrained and where repeated motion can affect both electrical performance and service life.

Options across industrial protocols

The CFROBOT8.PLUS family also includes cables for PROFINET, PROFIBUS, CAN bus and Ethernet applications up to CAT7. That range gives users options across several industrial communication systems, while the new DeviceNet cable extends the family to another industrial communication protocol.

Igus says CFROBOT8.PLUS cables, like all chainflex cables, are tested in its 5,500-square-meter laboratory under simulated real-world robotic motion. The company reports that testing has demonstrated reliable electrical performance through more than 15 million cycles.

The new DeviceNet cable therefore adds a protocol-specific option to a family already positioned around continuous torsional motion. Its practical value will depend on the installation: available space, movement profile and the communication requirements of the robot or machine. Igus’s claims about cycle life and signal integrity are based on its own laboratory testing and product design, rather than on an independent field study described in the source material.

Those design choices point to the trade-offs involved in robotic cable selection. Torsional movement can place repeated stress on conductors and shields, while compact equipment leaves less room for cable routing. Igus is addressing both with a smaller cable that is still offered with a braided shield and environmental protection. The new DeviceNet option extends that approach to one more industrial communication standard, but its suitability still depends on the motion profile and installation conditions of each robot. That makes the announcement relevant to designers comparing cable options for six-axis robots and similar systems.

Reported by Mateo Alvarez, Hydraulic, Undercarriage and Fleet Reliability Analyst.